About Bobbers
Ever since the classic movie
"Easy Rider" was launched in 1969, everybody seems to know what a Chopper
should look like. It's easy. The general idea is that Choppers have long
front forks and lots of chrome, and prefereably they are ridden by outcasts.
However, when
it comes to Bobbers it would seem that many people are a bit less
secure...
Ever since
November 2007, when we started working on our Harley Davidson and Indian
Bobber websites, we have many times received that one particular question
from our visitors:
What Exactly is a Bobber?
While the
answer to the question may seem quite simple, in reality there's more to it
than you might think.
We've heard
people say that certain bikes that everybody thought were Bobbers were in fact
not Bobbers at all. Or that a Bobber can only be a Bobber if it is a dirt track
racing bike.
We've also
heard people say that Choppers and Bobbers are all one and the same thing. Or
that on the West Coast USA a certain bike would be called a Chopper, while on
the East Coast that very same bike would be called a Bobber. And then - to
complicate matters even more - there's the people talking about their
"Chopper Bobbers"...
So on this page
we will try to shed some light on the Bobber question, and we will try to put
some definitions in place. If only for our own use.
Chopping versus Bobbing - A Matter of Language
Maybe people
who say that Choppers and Bobbers are the same thing could have a point. After
all, in a way the verbs "chopping" and "bobbing" could both
be explained as "taking something off". Still, we feel there is a
profound difference in meaning between the words "chopping" and
"bobbing".
Whereas the
verb "bobbing" refers to an action where a part is removed, cropped
or shortened (like a hairdresser would create a "bobline"), the verb
"chopping" usually refers to more drastic action. Like chopping a
whole BBQ pork shoulder into bite-size chunks. Or like chopping a motorcycle
frame into pieces whereafter those pieces can be reassembled with a different
geometry.
General Definition of a Bobber
So what is a
Bobber?
In general terms, we would define
a Bobber as follows:
A "Bobber" is a stock motorcycle without major modifications,
except that most or all of the parts which do not contribute to speed and/or
performance have been removed or shortened (i.e. "bobbed").
As you can see
from the definition, in our perception a Bobber is bound to be minimalistic.
Actually, if you start with the proper stock motorcycle, building a Bobber
shouldn't cost you anything...
By the way, there's also this
other specific feature about Bobbers which is quite noteworthy:
A Bobber is NOT created in a factory. Bobbers are typically created in a
shed or garage behind the house, by ordinary people like you and me.
And How About Choppers?
Since Bobbers
are often confused with Choppers, we thought it would be good to clarify the
difference between them.
The way we see
it, for better or for worse, the difference between a Bobber and a Chopper is
in the length and/or rake of the front fork. A Bobber is a stock bike with all
excess parts removed and with the stock length and rake of the front fork still
intact, while a Chopper is a bike with an increased rake and length of the
front fork.
In general terms, we would define
a Chopper as follows:
A
"Chopper" is a motorcycle of which the rake of the front fork has
been increased to a rake which is considerably larger than the rake of the
original stock motorcycle.
By
"rake" we mean the angle with the vertical. While the rake of the
front fork is important from a styling point of view, the cornering and
stability characteristics of a bike are governed by the rake of the centerline
of the steering neck of the frame in combination with the trail of the front
wheel.
The rake of the
front fork can be increased by either lengthening the front fork, or by
increasing the rake of the frame by chopping it and rearranging its geometry,
or by playing a trick in the triple trees, or through any combination of the
foregoing.
So, in our
mind, as soon as a stock bike or a Bobber has her rake increased, that bike may
be cooler than Albert Collins and ZZ Top together on the North Pole, but she's
not a stock bike or a Bobber anymore. From then on she's a Chopper.
Chopper or Bobber? - How Serious Are We?
Of course there
will always be lots of grey area and we should not take the definitions on
these pages too strictly. If the 29.9 degrees stock rake of a 2010 Sportster is
increased to like 33 degrees, you will hardly see the difference, and we
shouldn't call that bike a Chopper just because it complies with the above
definition.
While we are
serious about what we wrote here, the definitions on these pages should be seen
as guidelines. It's not the law.
So, if in your
opinion your Chopper is a Bobber, respect. We just hope you don't mind us
calling her a Chopper...

Scrolling through these fine bikes from Connecticut on a January morning.....I can't wait till spring...
ReplyDelete